跳转到主内容
英语
中文

正翻译步骤 11

步骤 11
Insert and tighten all the screws carefully. They are quite small, and the PCB may be damaged if the screws are over tightened. Tighten the screws in an alternating pattern.  E.G.  Top left, Bottom right, Top right, Bottom left. With more than 4 screws, use a "Star" pattern when tightening the screws ensuring all screws are evenly tightened.
Reinstalling Fans/ Cleaning GPU
  • Insert and tighten all the screws carefully. They are quite small, and the PCB may be damaged if the screws are over tightened.

  • Tighten the screws in an alternating pattern. E.G. Top left, Bottom right, Top right, Bottom left. With more than 4 screws, use a "Star" pattern when tightening the screws ensuring all screws are evenly tightened.

  • Clean off any noticeable dust on the GPU.

仔细装好所有螺丝。它们通常都很小,如果拧得过紧可能会损坏电路板。

用交替的方式拧紧螺钉,例如左上 - 右下 - 右上 - 左下。如果有多于 4 个螺丝,按画五角星的顺序依次拧紧来保证受力均匀。

如果你发现有灰尘,一定要把它清理干净。

在开源创作共享许可协议下,你的投稿已被许可