跳转到主内容
英语
中文

正翻译步骤 10

步骤 10
Apply heatsink onto the main chip or on the connection side of the fan. Place the heat-sink over the GPU carefully, lining up any screws or clips.
Installing Heatsink
  • Apply heatsink onto the main chip or on the connection side of the fan.

  • Place the heat-sink over the GPU carefully, lining up any screws or clips.

  • Apply heatsink on thermal pads as applicable.

  • Use only a small amount of heatsink and spread evenly using a card, or apply pressure evenly when connecting components.

  • If there is thermal tape or pads that were removed for the reflow, place these back in their original position.

将散热硅脂抹在主芯片上或风扇连接的一侧。

小心地装上散热器,并用螺丝或夹具加以固定。

如有需要,在导热面上涂抹散热硅脂。

硅脂抹一点就够了。用卡片把它涂抹均匀,或在安装组件的时候均匀施加压力。

如果显卡上的耐热胶带或导热垫在进烤箱前被拆了下来,把它们装回原处。

在开源创作共享许可协议下,你的投稿已被许可