跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的4本指南

英语
中文

正翻译步骤 5

步骤 5
If you are reattaching the same shield plate to a new display, there is no need to peel the cable assembly off the LCD shield plate. Skip this step. Carefully peel the cable assembly off of the LCD shield plate to remove it from the display. Be careful not to grab the digitizer cable while peeling up the front facing camera and sensor assembly cable.
  • If you are reattaching the same shield plate to a new display, there is no need to peel the cable assembly off the LCD shield plate. Skip this step.

  • Carefully peel the cable assembly off of the LCD shield plate to remove it from the display.

  • Be careful not to grab the digitizer cable while peeling up the front facing camera and sensor assembly cable.

小心翼翼的把排线从屏幕挡板上撕下。

Carefully peel the cable assembly off of the LCD shield plate to remove it from the display.

Be careful not to grab the digitizer cable while peeling up the front facing camera and sensor assembly cable.

在开源创作共享许可协议下,你的投稿已被许可