跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的4本指南

英语
中文

正翻译步骤 3

步骤 3
Use the point of a spudger to lift the ambient light sensor and proximity sensor out of their recess in the display assembly. There is a small, square plastic and metal holder for the proximity sensor. This holder is essential for the proximity sensor to function correctly.
  • Use the point of a spudger to lift the ambient light sensor and proximity sensor out of their recess in the display assembly.

  • There is a small, square plastic and metal holder for the proximity sensor. This holder is essential for the proximity sensor to function correctly.

  • If replacing the proximity sensor make sure that the holder remains adhered to the back of the display. If it comes off with the old proximity sensor, remove it from the old sensor and use a tiny bit of adhesive to re-attach it to the back of the display.

用小撬棒把感应器从卡槽撬起。

Use the point of a spudger to lift the ambient light sensor and proximity sensor out of their recess in the display assembly.

There is a small, square plastic and metal holder for the proximity sensor. This holder is essential for the proximity sensor to function correctly.

If replacing the proximity sensor make sure that the holder remains adhered to the back of the display. If it comes off with the old proximity sensor, remove it from the old sensor and use a tiny bit of adhesive to re-attach it to the back of the display.

在开源创作共享许可协议下,你的投稿已被许可