跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的5指南

英语
中文

正翻译步骤 1

步骤 1
Detach the motherboard ribbon connecting the two sides of the controller by pulling it straight out with your fingers. Note the orientation of the cable and make sure it faces the right way when you reconnect it. After the two halves are separated, place the top of the controller off to the side.
  • Detach the motherboard ribbon connecting the two sides of the controller by pulling it straight out with your fingers.

  • Note the orientation of the cable and make sure it faces the right way when you reconnect it.

  • After the two halves are separated, place the top of the controller off to the side.

使用手指来断开控制器两侧的主板排线。

注意排线的方向,并且在重新连接的时候确认其方向正确。

断开后,将控制器的顶部放在一边。

在开源创作共享许可协议下,你的投稿已被许可