跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的9本指南

英语
中文

正翻译步骤 3

步骤 3
Wedge a plastic opening tool into the case-splittings and pull down to crack open the casing near the following buttons: Share button Options button
  • Wedge a plastic opening tool into the case-splittings and pull down to crack open the casing near the following buttons:

  • Share button

  • Options button

  • Split the plastic covers of the controller apart, taking note that they will still be attached by circuit board ribbons.

  • Three small pieces are often released from the framework. To prevent loss, maintain a controlled work field.

  • 2 Trigger Springs

  • 1 Grey Reset Button Extension

将一个撬棒楔入壳体来打开以下按钮附近的卡扣:

Share键

Options键

将控制器塑料外壳分开,注意两者依然通过排线连接。

3个小模块经常从框架中跑出,为了避免损失,请保持工作台的干净整洁。

2个触发弹簧

1个灰色复位按钮扩展

在开源创作共享许可协议下,你的投稿已被许可