Skip to main content
英语
中文

正翻译步骤 3

Step 3
Use a 5.5mm flathead screwdriver to anchor the backing bracket located on the inside of the binding. Using a Phillips #2 screwdriver, locate and unscrew the countersunk ovalhead M4 x 16mm screw holding the heel strap connector to the binding. Using a Phillips #2 screwdriver, locate and unscrew the countersunk ovalhead M4 x 16mm screw holding the heel strap connector to the binding.
  • Use a 5.5mm flathead screwdriver to anchor the backing bracket located on the inside of the binding.

  • Using a Phillips #2 screwdriver, locate and unscrew the countersunk ovalhead M4 x 16mm screw holding the heel strap connector to the binding.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可