跳转到主内容
英语
中文

正翻译步骤 1

步骤 1
Use a 5.5mm flathead screwdriver to anchor the backing bracket located on the inside of the binding. Using a Phillips #2 screwdriver, unscrew the countersunk ovalhead M4 x 16mm screw connecting the heel strap ladder to the binding. Using a Phillips #2 screwdriver, unscrew the countersunk ovalhead M4 x 16mm screw connecting the heel strap ladder to the binding.
  • Use a 5.5mm flathead screwdriver to anchor the backing bracket located on the inside of the binding.

  • Using a Phillips #2 screwdriver, unscrew the countersunk ovalhead M4 x 16mm screw connecting the heel strap ladder to the binding.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可