注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的11本指南。
正翻译步骤 7
步骤 7
-
Use the edge of a plastic opening tool to flip up the retaining flaps holding the digitizer ribbon cables in their sockets on the logic board.
-
Pull the digitizer ribbon cables straight out of their sockets.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。