跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 1

步骤 1
Use the edge of a plastic opening tool to: Pry the side button connector up off the logic board from underneath the wires. Pry the speaker connector up off its socket on the logic board from beneath the speaker wires.
  • Use the edge of a plastic opening tool to:

  • Pry the side button connector up off the logic board from underneath the wires.

  • Pry the speaker connector up off its socket on the logic board from beneath the speaker wires.

  • Carefully flip up the ZIF ribbon cable retaining flap on the socket near the headphone jack.

  • Be sure you are prying up on the retaining flap, not the socket itself.

  • Pull the headphone jack ribbon cable toward the left side of the iPad to disconnect it from its socket.

使用塑料打开工具撬开边缘:

从侧面的电线上将侧按钮从逻辑板上取下。

将扬声器从扬声器导线下方的逻辑板上的插座上拔下。

小心地将ZIF带状电路保持盖翻转在耳机插孔附近的插座上。

确保你正在撬起挡板,而不是插座本身。

将耳机插孔带状电路拉向iPad的左侧,以将其与插座断开连接。

在开源创作共享许可协议下,你的投稿已被许可