跳转到主内容

修复你的物品

维修的权力

商店

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的6指南

英语
意大利语

正翻译步骤 1

步骤 1
Unscrew the single captive Phillips #000 screw securing the home button cable. The captive screw is fastened to the home button cable by a spring contact backing. During reassembly, ensure the contact is in the correct orientation—on the side of the screw nearest the LCD.
  • Unscrew the single captive Phillips #000 screw securing the home button cable.

  • The captive screw is fastened to the home button cable by a spring contact backing. During reassembly, ensure the contact is in the correct orientation—on the side of the screw nearest the LCD.

  • If your replacement part does not have this captive screw and spring contact, you will need to transfer them to the new cable.

Rimuovere la singola vite prigioniera Philips #000 tenendo facendo attenzione al cavo del pulsante Home.

La vite prigioniera e attaccata al cavo del pulsante home tramite un contatto a molla. Durante il riassemblaggio assicurarsi che il contatto sia nella giusta direzione, dal lato della vite più vicina all'LCD.

Se il nuovo componente non ha la vite e il contatto a molla, dovrai trasferire quella vecchia sul nuovo cavo.

在开源创作共享许可协议下,你的投稿已被许可