跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 8

步骤 8
Remove the three silver Phillips 3.5mm screws that secure the keyboard to the computer. Lift the rear edge of the keyboard and slide the keyboard back until the keyboard connector on the system board is accessible. Lift the rear edge of the keyboard and slide the keyboard back until the keyboard connector on the system board is accessible.
  • Remove the three silver Phillips 3.5mm screws that secure the keyboard to the computer.

  • Lift the rear edge of the keyboard and slide the keyboard back until the keyboard connector on the system board is accessible.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可