跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 2

步骤 2
Use the tip of a spudger to pry the ringer switch bracket away from the side of the case. Remove the ringer switch from its recess between the ringer switch bracket and the case. Note the orientation for reassembly: The red line should be at the top of the button. The notch in the back of the ringer switch button should be in the same position as, and mate with, the mechanical switch on the cable.
  • Use the tip of a spudger to pry the ringer switch bracket away from the side of the case.

  • Remove the ringer switch from its recess between the ringer switch bracket and the case.

  • Note the orientation for reassembly: The red line should be at the top of the button. The notch in the back of the ringer switch button should be in the same position as, and mate with, the mechanical switch on the cable.

用撬棒的尖头把静音键支架从后盖上剥离初来。

把静音键从静音键支架和后盖之间分离出来。

重装时要注意方向:有红线部分要在按钮上方,静音键要安装在合适的位置并且能够接触到排线。

在开源创作共享许可协议下,你的投稿已被许可