跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的3本指南

英语
中文

正翻译步骤 1

步骤 1
Run the tip of a spudger between the battery and the headphone jack to unfold the battery adhesive tab. Important: Apply heat to the bottom of the iPhone case using an iOpener or similar heating pad to soften up the battery adhesive strips and make them more flexible, otherwise they will probably break when you pull on them. Important: Apply heat to the bottom of the iPhone case using an iOpener or similar heating pad to soften up the battery adhesive strips and make them more flexible, otherwise they will probably break when you pull on them.
  • Run the tip of a spudger between the battery and the headphone jack to unfold the battery adhesive tab.

  • Important: Apply heat to the bottom of the iPhone case using an iOpener or similar heating pad to soften up the battery adhesive strips and make them more flexible, otherwise they will probably break when you pull on them.

用撬棒的尖端在电池和耳机插口的中间展开电池粘合标签。

重要提示:使用 iOpener 或者类似的发热工具,对 iPhone 背面进行加热,使电池的粘合胶带软化,变得柔韧,否则待会你拉它的时候很可能会扯断。

在开源创作共享许可协议下,你的投稿已被许可