跳转到主内容
英语
中文

正翻译步骤 19

步骤 19
Remove the seven Phillips screws securing the left trigger, right trigger, and the stylus holder to the bottom outer case. Lift the SD board and the stylus holder out of the case.
  • Remove the seven Phillips screws securing the left trigger, right trigger, and the stylus holder to the bottom outer case.

  • Lift the SD board and the stylus holder out of the case.

  • The electronic right trigger button is integrated into the SD board.

  • Reassembling the triggers is quite difficult. Take them apart if you dare.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可