翻译步骤＃3 - Constructing a Capacitor Discharge Tool - iFixit

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南。

英语

中文

上一步下一步

正翻译步骤 3

步骤 3

Next, trim both of the leads leaving the resistor to match the length of insulation stripped off the wires in the previous step.

Next, trim both of the leads leaving the resistor to match the length of insulation stripped off the wires in the previous step.

Next, trim both of the leads leaving the resistor to match the length of insulation stripped off the wires in the previous step.

在开源创作共享许可协议下，你的投稿已被许可。