跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的4指南

英语
中文

正翻译步骤 8

步骤 8
Carefully wedge a plastic card under the battery on the side nearest the logic board. Do not pry against the logic board or you may damage the phone.
  • Carefully wedge a plastic card under the battery on the side nearest the logic board.

  • Do not pry against the logic board or you may damage the phone.

  • Avoid prying near the top edge of the battery, or you may damage the upper component ribbon cable.

  • Slide the card from the top of the battery to the bottom, pushing toward the edge of the case.

  • If you still trouble, apply some isopropyl alcohol (90% or greater) under the battery and let it flow around the adhesive to help weaken it. High concentration isopropyl alcohol acts as a solvent and dries without leaving any residue, so it will not hurt your iPhone.

  • If necessary, repeat the same procedure with the case side of the battery.

小心的在主板附近的电池下方楔一个塑料卡片。

不要在主板对向撬开,否则可能会损坏手机。

避免在电池顶部附近撬动,否则可能会损坏上部带状电缆组件

将卡从电池顶部滑到底部,朝向外壳的边缘推。

如果仍然有问题,请在电池下面涂上一些异丙醇(90%或更高),让它在粘合剂周围流动,以帮助减弱它。高浓度异丙醇充当溶剂并干燥而不留任何残留物,因此不会伤害你的 iPhone。

如有必要,请重复动作在外壳侧的电池。

在开源创作共享许可协议下,你的投稿已被许可