跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的4指南

英语
中文

正翻译步骤 7

步骤 7
Follow our iOpener heating instructions or use a hair dryer to heat the adhesive securing your battery to the rear case.
Battery removal with latent adhesive
  • Follow our iOpener heating instructions or use a hair dryer to heat the adhesive securing your battery to the rear case.

  • Lay the iOpener flat on the backside of the iPhone to the right of the camera. Smooth it out so that there is good contact between the back of the iPhone and the iOpener.

  • Let the bag sit on the iPhone for approximately 90 seconds before attempting to remove the battery.

  • If using a hair dryer or heat gun, heat the back of the iPhone until it's slightly too hot to touch.

  • Do not apply heat directly to the battery.

根据我们的iOpener加热指导或吹风机来加热将电池粘在后壳上的粘胶。

将iOpener平放在iPhone背面的相机右侧。 让它平滑贴合于手机后壳,以便iPhone和iOpener之间有良好的接触。

让iOpener在iPhone上放置大约90秒,然后再尝试取出电池。

如果使用吹风机或加热风枪,将手机背部加热到微烫的程度。

不要直接加热电池。

在开源创作共享许可协议下,你的投稿已被许可