跳转到主内容
英语
中文

正翻译步骤 4

步骤 4
In the following steps, you will use a heat gun to soften the adhesive securing the metal LCD frame to the front display bezel. Heat guns have the capability of producing an extremely hot jet of air, so be sure not to overheat the LCD panel.
  • In the following steps, you will use a heat gun to soften the adhesive securing the metal LCD frame to the front display bezel. Heat guns have the capability of producing an extremely hot jet of air, so be sure not to overheat the LCD panel.

  • With the heat gun set to low, start by heating the front display bezel near the upper left corner of the display panel.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可