注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的16本指南。
正翻译步骤 1
步骤 1
-
Remove the following five screws:
-
One 3 mm Phillips near the screen latch (mind the big magnet on the screen latch).
-
Two 3.5 mm Phillips attaching the EMI fingers to the metal framework.
-
One 10 mm Phillips near the optical drive.
-
One 14 mm long 4 mm standoff in the upper left corner. You can remove this standoff either with a 4 mm nut driver or needlenose pliers.
-
Lift the EMI fingers above the battery connector away from the metal framework.