注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的16本指南。
正翻译步骤 3
步骤 3
-
Peeling up yellow tape as necessary, remove the following 8 screws:
-
One 4.5 mm Phillips on the right side of the heat sink.
-
Three 6 mm Phillips near the display.
-
Two large 7.5 mm Phillips with springs (don't forget to remove the springs). If the springs are not releasing, needle nose pliers can help get this done.
-
Two 13 mm screws from the left side of the heat sink and the right side of the fan.