注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的10指南。
正翻译步骤 2
步骤 2
注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的10指南。
The picture at left (rear panel already removed) shows the locations of the metal clips (shown in red) that snap on to the front display bezel. In the next few steps, you will use a small flathead screwdriver to release these clips from a ridge around the perimeter of the front display bezel.
When prying in the following steps, be sure not to damage the antenna cables that run around the perimeter of the front display bezel.
下一行
上一行
在下面插入新的一行
在上面插入新的一行
缩进当前行
取消缩进当前行
删除当前行
导航到下一步。
导航到上一步。
打开帮助