注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的16本指南

英语
中文

正翻译步骤 3

步骤 3
Peeling up yellow tape as necessary, remove the following 8 screws:
  • Peeling up yellow tape as necessary, remove the following 8 screws:

  • One 4.5 mm Phillips on the right side of the heat sink.

  • Three 6 mm Phillips near the display.

  • Two large 7.5 mm Phillips with springs (don't forget to remove the springs). If the springs are not releasing, needle nose pliers can help get this done.

  • Two 13 mm screws from the left side of the heat sink and the right side of the fan.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可