跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 2

Step 2
Use a plastic opening tool to pry the edge of the home button ribbon cable up from the display assembly. Start under the contact points on the right and work to the left.
  • Use a plastic opening tool to pry the edge of the home button ribbon cable up from the display assembly.

  • Start under the contact points on the right and work to the left.

  • Starting from the left and going right may rip your ribbon cable. The contacts are well adhered to the front panel and should be peeled up first.

  • If you have trouble sliding the plastic opening tool under the contact points, flip the tool over and gently push against the right side of the contact cable to loosen the adhesive, then try again.

用塑料撬棒从边缘挑开屏幕上Home键排线。

从右向左挑开接触点。

从左向右挑开会挑断排线。排线是牢固的贴在前置面板上的,应该优先取下。

如果塑料撬棒在接触点下方无法动作,就在右侧用撬棒口抵住排线轻轻推动排线,然后再尝试挑开排线。

在开源创作共享许可协议下,你的投稿已被许可