跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南

英语
中文

正翻译步骤 1

步骤 1
Use the flat end of a spudger to disconnect the power supply DC-Out connector from its socket on the IO board. Use the tip of a spudger to disconnect the power supply data cable from its socket on the IO board. For both cables, make sure to pry straight up on the connector, and not the socket.
  • Use the flat end of a spudger to disconnect the power supply DC-Out connector from its socket on the IO board.

  • Use the tip of a spudger to disconnect the power supply data cable from its socket on the IO board.

  • For both cables, make sure to pry straight up on the connector, and not the socket.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可