跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南

英语
中文

正翻译步骤 2

步骤 2
Remove the four 9.0 mm silver T10 Torx screws from the sides of the power supply. The power supply overhangs these screws somewhat, so you'll need to use a fixed screwdriver at a bit of an angle.
  • Remove the four 9.0 mm silver T10 Torx screws from the sides of the power supply.

  • The power supply overhangs these screws somewhat, so you'll need to use a fixed screwdriver at a bit of an angle.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可