跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的5指南

英语
中文

正翻译步骤 3

Step 3
Before you install your new front panel, you'll need to transfer the smart cover magnets on your OLD front panel to your new front panel. Place the edge of a plastic opening tool on each side of the magnet near the top left corner of the front panel assembly.
  • Before you install your new front panel, you'll need to transfer the smart cover magnets on your OLD front panel to your new front panel.

  • Place the edge of a plastic opening tool on each side of the magnet near the top left corner of the front panel assembly.

  • Carefully wedge the edge of the right plastic opening tool underneath the magnet.

  • Steadily hold the right plastic opening tool in place.

  • Wedge the left plastic opening tool underneath the magnet and simultaneously pry and push it towards the right plastic opening tool.

  • This will require some force as the smart cover magnet is held in place with strong adhesive.

在安装新的前面板之前,需要将旧的前面板上的smart cover 磁铁转移到新的前面板上。

将塑料打开工具的边缘放在靠近磁铁侧,位于前面板组件的左上方。

使用右边的塑料打开工具小心地楔住磁体下面。

将右侧的打开工具固定住。

将左侧塑料打开工具楔入磁铁下方,同时向右侧工具方向撬动。

这将需要用些力量,因为smart cover磁贴用强力粘合剂所固定。

在开源创作共享许可协议下,你的投稿已被许可