注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南。
正翻译步骤 4
步骤 4
-
De-solder the four wires boxed in red using the same procedure on the preceding step.
注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南。
In this step, you will de-solder the four wires pictured. Mark the wires with a sharpie or a paint marker to keep track of their locations, as each pair of leads is nearly identical.
De-solder the four wires boxed in red using the same procedure on the preceding step.
Do not apply too much heat to the joints as you de-solder, as the ribbon cable they are soldered to is extremely delicate and melts easily.
下一行
上一行
在下面插入新的一行
在上面插入新的一行
缩进当前行
取消缩进当前行
删除当前行
导航到下一步。
导航到上一步。
打开帮助