修复你的物品

维修的权力

配件 & 工具

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的17指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 12

步骤 12
Remove the following Phillips #000 screws securing the front panel assembly cable bracket to the logic board:

  • Remove the following Phillips #000 screws securing the front panel assembly cable bracket to the logic board:

  • Two 1.3 mm screws

  • One 1.7 mm screw

  • One 3.25 mm screw

  • It is especially important to keep track of your screws in this step for reassembly. Accidentally using the 3.25 mm screw or the 1.7 mm screw in the bottom right hole will result in significant damage to the logic board causing the phone to no longer boot properly.

  • Be careful not to over-tighten the screws. If they don't fit easily when you are securing them, they may be the wrong size—don't force them.

拧掉主板上固定前置面板排线金属屏蔽罩上十字#000螺丝：

2颗1.3mm的螺丝

1颗1.7mm的螺丝

1颗3.25mm的螺丝

记住这些螺丝的位置是很重要的对于重组机器时来说。错误的把3.25mm螺丝或者1.7mm螺丝拧在右下角会对主板造成不可修复的损伤使得iPhone无法开机。

螺丝不要拧太紧。如果拧紧螺丝时很困难可能是使用了错误规格的螺丝刀，请不要使用蛮力。

在开源创作共享许可协议下，你的投稿已被许可。