iPhone 5c Screen Replacement

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的17指南。

英语

荷兰语

正翻译步骤 12

步骤 12

Remove the following Phillips #000 screws securing the front panel assembly cable bracket to the logic board:
Two 1.3 mm screws
One 1.7 mm screw
One 3.25 mm screw
It is especially important to keep track of your screws in this step for reassembly. Accidentally using the 3.25 mm screw or the 1.7 mm screw in the bottom right hole will result in significant damage to the logic board causing the phone to no longer boot properly.
Be careful not to over-tighten the screws. If they don't fit easily when you are securing them, they may be the wrong size—don't force them.