跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的17指南

英语
中文

正翻译步骤 6

步骤 6
Make sure the suction cup is firmly attached to the front panel assembly. While holding the iPhone down with one hand, pull up on the suction cup to slightly separate the front panel assembly from the rear case.
Start lifting the front panel assembly
  • Make sure the suction cup is firmly attached to the front panel assembly.

  • While holding the iPhone down with one hand, pull up on the suction cup to slightly separate the front panel assembly from the rear case.

  • Take your time and apply firm, constant force. The display assembly is a much tighter fit than most devices.

  • With a plastic opening tool, begin to gently pry the rear case down, away from the display assembly, while you pull up with the suction cup.

  • There are several clips attaching the front panel assembly to the rear case, so you may need to use a combination of the suction cup and plastic opening tool to free the front panel assembly.

确定吸盘牢固的贴合在前置面板上。

一只手用撬棒下压机器,另一只手轻柔的拉起吸盘使前置面板从后盖上分离出来。

慢慢的使匀力稳当的拉起吸盘。屏幕是装配得最紧的比起大多数部件来说。

当你拉起吸盘时,使用塑料撬棒轻轻的下压后盖是屏幕分离出来。

有好几个卡扣在前置面板和后盖之间,所以需要组合使用吸盘和塑料撬棒使前置面板分离出来。

在开源创作共享许可协议下,你的投稿已被许可