跳转到主内容
英语
中文

正翻译步骤 7

步骤 7
With tape removed, the connections on the LCD main board can be disconnected.
  • With tape removed, the connections on the LCD main board can be disconnected.

  • First, remove the single hold-down using the philips head screwdriver.

  • Now locate the three connections the main cable makes with the monitor. Two are on the LCD Main Board and one other to the side.

  • Disconnect the white connector to the LCD main board by gently lifting tab with small pry tool and pulling out.

  • The tabs can easily break off, be extra careful

  • Disconnect the black connector to the LCD main board by pressing the tab and pulling out.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可