跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 11

步骤 11
Use the tip of a spudger to free the adhesive securing the vibrator contact portion of the upper assembly cable from the rear case. If the flash assembly has not already popped out of its hole in the rear case, use the tip of a spudger to push it free. If the flash assembly has not already popped out of its hole in the rear case, use the tip of a spudger to push it free.
  • Use the tip of a spudger to free the adhesive securing the vibrator contact portion of the upper assembly cable from the rear case.

  • If the flash assembly has not already popped out of its hole in the rear case, use the tip of a spudger to push it free.

用撬棒的尖头挑起前置排线与振子接触点固定在后盖上的胶贴。

如果闪光灯没有从后盖的固定孔中分离出来,可以使用撬棒的尖头把其剥离出来。

在开源创作共享许可协议下,你的投稿已被许可