跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南

英语
中文

正翻译步骤 3

步骤 3
Try to keep the strips flat and unwrinkled during this procedure; wrinkled strips will stick together and break instead of pulling out cleanly. Slowly pull one of the battery adhesive strips away from the battery, toward the bottom of the iPhone.
  • Try to keep the strips flat and unwrinkled during this procedure; wrinkled strips will stick together and break instead of pulling out cleanly.

  • Slowly pull one of the battery adhesive strips away from the battery, toward the bottom of the iPhone.

  • Pull steadily, maintaining constant tension on the strip as it slips out from between the battery and the rear case. For best results, pull the strip at a 60º angle or less.

试着保持胶带平整,不要弯曲;弯曲的胶带会粘在一起,不便于整个拉起。

慢慢地把电池胶带拉起来,向着iPhone的底部。

拉的时候手要稳。要最好的效果,只需把胶带拉到60度或更小。

在开源创作共享许可协议下,你的投稿已被许可