跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南

英语
中文

正翻译步骤 2

步骤 2
Remove the rear-facing camera from the rear case. During reassembly, the camera cable should bend in a 'U' shape to slot in behind the logic board. If the rubber camera bumper has shifted, be sure to replace it before reassembling your iPhone.
  • Remove the rear-facing camera from the rear case.

  • During reassembly, the camera cable should bend in a 'U' shape to slot in behind the logic board.

  • If the rubber camera bumper has shifted, be sure to replace it before reassembling your iPhone.

把后置摄像头从后盖移除。

在重新安装的过程,摄像头线缆应该弯曲成"U"字形并且放置在逻辑板的凹槽处。

如果橡胶摄像头减震物被移位了,一定要确保在重新安装前将其复位。

在开源创作共享许可协议下,你的投稿已被许可