跳转到主内容
英语
中文

正翻译步骤 6

步骤 6
Remove (2) Phillips heads screws (one is shown, the other is on the left lower side) Disconnect two cables from logic board to screen. Be very careful not to break our bend too badly. Main camera connection & front camera
  • Remove (2) Phillips heads screws (one is shown, the other is on the left lower side)

  • Disconnect two cables from logic board to screen. Be very careful not to break our bend too badly.

  • Main camera connection & front camera

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可