跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 1

步骤 1
Once the charger connector is pulled out, proceed with removing the logic board. To remove the logic board, grip the four corners of the logic board and lift from the front inner case.
  • Once the charger connector is pulled out, proceed with removing the logic board.

  • To remove the logic board, grip the four corners of the logic board and lift from the front inner case.

  • Notice the second picture the logic board has been turned over with the button side facing up.

  • Note: Upon reassembly the logic board must be placed correctly. The button side with the various circles should face down, lining up with the circular holes on the inner case.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可