跳转到主内容
英语
中文

正翻译步骤 12

步骤 12
Cover up with electrical tape the rest the white and black/outer cable you just soldered. Join them together with electrical tape as to form one cable and place the AC charger in one of the faces of the plastic enclosure. White electrical tape makes this fix look nicer.
  • Cover up with electrical tape the rest the white and black/outer cable you just soldered.

  • Join them together with electrical tape as to form one cable and place the AC charger in one of the faces of the plastic enclosure.

  • White electrical tape makes this fix look nicer.

  • Take 3 small zip ties and tie them around the cable to stop it from being pulled out of the plastic enclosure.

使用電膠布將剛剛焊接后,剩餘的白色/黑色/編織包裹起來。

用電膠布將他們包裹成一根。將其置於AC適配器的一個塑件外殼內。

使用白色的電膠布會更好看。

取3根束線帶并將電線束緊避免其被從塑料外殼上拉出。

在开源创作共享许可协议下,你的投稿已被许可