跳转到主内容
英语
中文

正翻译步骤 3

Step 3
Look at the line that goes though the charger. This is all glued with some super adhesive that prevents you from just taking it apart. You will have to cut through that plastic, go all the way around following that small space with your knife. This will take a while, you have to cut the plastic from all the 4 sides. You will notice when you have cut through most of it.
  • Look at the line that goes though the charger. This is all glued with some super adhesive that prevents you from just taking it apart.

  • You will have to cut through that plastic, go all the way around following that small space with your knife.

  • This will take a while, you have to cut the plastic from all the 4 sides. You will notice when you have cut through most of it.

  • Be careful with the side shown in the last picture. There are a couple of components that might be cut in the process.

充電器頭結合部份是用強粘度的膠水粘合防止被輕易拆除。

你只能用刀沿著結合線切割塑料外殼。

這會費一點時間,你需要將4個面的結合都切開。當你切斷大部份的時候,你就會意識到是這樣子。

最後一張圖片顯示的那一面,在切割時需要特別小心,有一些零件可能會被切壞。

在开源创作共享许可协议下,你的投稿已被许可