跳转到主内容

修复你的物品

维修的权力

配件 & 工具

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 13

步骤 13
On the plastic guard, there are two rubber pads that cover the buttons. Remove them. These pads rest on the motherboard and sometimes stick to it. If they do, peel them off. With the rubber pads off, you may use your fingers to remove the buttons to clean or replace them.
  • On the plastic guard, there are two rubber pads that cover the buttons. Remove them.

  • These pads rest on the motherboard and sometimes stick to it. If they do, peel them off.

  • With the rubber pads off, you may use your fingers to remove the buttons to clean or replace them.

  • When returning the buttons to the guard, they have to be put back in exactly the way they were pulled out.

在塑料支架上有两片橡胶垫垫着按键。取下它们。

这些橡胶垫有时会粘在主板上。如果它们粘住了,把它们撕下来。

取下橡胶垫后,你能用你的手指将案件取下来以便清理或更换它们。

在将按键装回支架的时候,它们必须确切地放回原本的位置。

在开源创作共享许可协议下,你的投稿已被许可