跳转到主内容
英语
中文

iPhone 5s 顶部排线更换

指南信息

= 完成 = 未完成
    Use this guide to replace the upper component cable containing the flash, microphone, and sleep/power button cable of an iPhone 5s. [ … ] This guide requires removing the battery. Removing the battery with the adhesive strips is the safest method, but also leaves your battery without adhesive. When replacing your battery, use a piece of double-sided tape to secure it. The battery is pretty tightly secured in the device, but the tape will keep it from rattling. [ … ] '''YouYou can also use this guide to replace the [https://www.ifixit.com/Guide/iPhone+5s+Upper+Component+Cable+Replacement/20280#s57896|logic board antenna bracket] and [https://www.ifixit.com/Guide/iPhone+5s+Upper+Component+Cable+Replacement/20280#s57898|contact clip].''' clip]. [ … ] [video|https://www.youtube.com/watch?v=cJUKOvFQUWU]
    Use this guide to replace the upper component cable containing the flash, microphone, and sleep/power button cable of an iPhone 5s. [ … ] This guide requires removing the battery. Removing the battery with the adhesive strips is the safest method, but also leaves your battery without adhesive. When replacing your battery, use a piece of double-sided tape to secure it. The battery is pretty tightly secured in the device, but the tape will keep it from rattling. [ … ] '''YouYou can also use this guide to replace the [https://www.ifixit.com/Guide/iPhone+5s+Upper+Component+Cable+Replacement/20280#s57896|logic board antenna bracket] and [https://www.ifixit.com/Guide/iPhone+5s+Upper+Component+Cable+Replacement/20280#s57898|contact clip].''' clip]. [ … ] [video|https://www.youtube.com/watch?v=cJUKOvFQUWU]

      描述一下你正在修理的device的特别配件或组件。例如:电池

      创建一个标题。

      这个简短的一两句总结将会出现在搜索结果中。

      在读者深入阅读这份指南之前做好背景信息交流。

      说明(指南)步骤

      第 1 步

      松开把音量键和静音键固定在左侧边框上的螺丝:

      第 2 步

      用撬棒把静音键从左侧边框拨出。

      第 3 步

      用撬棒把左侧边框上的音量键拨出。

      第 4 步

      用镊子取出把后置摄像头固定在后盖的胶片垫。

      第 5 步

      松开把逻辑主板天线支架固定在后盖上的1.3mm飞利浦#000号螺丝。

      第 6 步

      取出逻辑主板上的天线支架。

      第 7 步

      松开固定链接片和电源键支架的2.1mm飞利浦#000号螺丝。

      第 8 步

      从机身中取出链接片。

      第 9 步

      将平口撬棒插入顶部排线下方滑动使其与后盖分离。

      第 10 步

      滑动平口撬棒在靠近音量键的排线下方。

      第 11 步

      用撬棒的尖头挑起前置排线与振子接触点固定在后盖上的胶贴。

      第 12 步

      用撬棒的尖头把扬声器排线从后盖上分离出来。

      第 13 步

      用镊子从后盖上取出电源键固定支架。

      第 14 步

      用撬棒尖头把电源键向机身内侧拨动。

      第 15 步

      取出把电源键固定机身中的卡扣。

      第 16 步

      从机身中取出顶部排线。

      在开源创作共享许可协议下,你的投稿已被许可