跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 2

步骤 2
Use the tip of a spudger to pry the ringer switch bracket from the side of the rear case. Remove the ringer switch. Note the orientation for reassembly: The red line should be at the top of the button. The notch in the back of the ringer switch button should be in the same position as, and mate with, the mechanical switch on the cable.
  • Use the tip of a spudger to pry the ringer switch bracket from the side of the rear case.

  • Remove the ringer switch.

  • Note the orientation for reassembly: The red line should be at the top of the button. The notch in the back of the ringer switch button should be in the same position as, and mate with, the mechanical switch on the cable.

用撬棒把静音键从左侧边框拨出。

取出静音键。

重装时注意观察方向:有红线的一面应该按键的上方。按键有凹口的一面因放置合适的位置,并和相匹配静音键排线衔接。

在开源创作共享许可协议下,你的投稿已被许可