跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
西班牙语

正翻译步骤 3

步骤 3
The Lightning connector data cable is held to the logic board and rear case with mild adhesive. Use an opening pick to slowly separate the cable from the logic board.
  • The Lightning connector data cable is held to the logic board and rear case with mild adhesive.

  • Use an opening pick to slowly separate the cable from the logic board.

El cable de datos del conector Lightning se mantiene a la placa lógica y la carcasa trasera con pegamento moderado.

Usa una púa para separar lentamente el cable de la placa lógica.

在开源创作共享许可协议下,你的投稿已被许可