注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的11本指南。
正翻译步骤 1
步骤 1


-
Pull up on the SATA power cable connector to disconnect it.
-
Unplug the SATA data cable connector by depressing its locking tab and pulling straight up on the connector.
-
Remove the SATA cable from the logic board assembly to get it out of the way and prevent it from being damaged.
[* black] Pull up on the SATA power cable connector to disconnect it. |
[* black] Unplug the SATA data cable connector by |
[* black] Unplug the SATA data cable connector by |
[* black] Remove the SATA cable from the logic board assembly to get it out of the way and prevent it from being damaged. |