跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的7指南

英语
意大利语

正翻译步骤 8

步骤 8
Pull the logic board slightly away from the rear facing camera. Do not try to remove the logic board just yet, as it is still connected by an antenna cable on the back. Flip the logic board toward the battery, as if you are turning the page in a book.
  • Pull the logic board slightly away from the rear facing camera.

  • Do not try to remove the logic board just yet, as it is still connected by an antenna cable on the back.

  • Flip the logic board toward the battery, as if you are turning the page in a book.

Tira la scheda logica per allontanarla lievemente dalla fotocamera posteriore.

Non provare ancora a rimuovere la scheda logica, perche è ancora connessa da un cavo di antenna nella parte posteriore.

Rigira la scheda logica verso la batteria, come se stessi girando la pagina di un libro.

在开源创作共享许可协议下,你的投稿已被许可