跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的7指南

英语
西班牙语

正翻译步骤 8

步骤 8
Pull the logic board slightly away from the rear facing camera. Do not try to remove the logic board just yet, as it is still connected by an antenna cable on the back. Flip the logic board toward the battery, as if you are turning the page in a book.
  • Pull the logic board slightly away from the rear facing camera.

  • Do not try to remove the logic board just yet, as it is still connected by an antenna cable on the back.

  • Flip the logic board toward the battery, as if you are turning the page in a book.

Aleja la placa lógica ligeramente de la cámara trasera.

No intentes remover la placa lógica todavía ya que está aun conectada por un cable de antena en la parte trasera.

Voltea la placa lógica hacia la batería como si estuvieras volteando la página de un libro.

在开源创作共享许可协议下,你的投稿已被许可