跳转到主内容

注:你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南

英语
中文

正翻译步骤 1

步骤 1
Carefully note the brown colored locking bar that shims the ribbon cable in it's housing so it cannot slip. Using a nylon stick (or some other ESD safe probe) gently push both sides of the locking bar up. Now the ribbon cable should move freely. A careful prod using your nylon spudger should be able to free the cable. This should barely require any force at all. Otherwise, check that the locking bar is fully disengaged.
  • Carefully note the brown colored locking bar that shims the ribbon cable in it's housing so it cannot slip.

  • Using a nylon stick (or some other ESD safe probe) gently push both sides of the locking bar up.

  • Now the ribbon cable should move freely. A careful prod using your nylon spudger should be able to free the cable. This should barely require any force at all. Otherwise, check that the locking bar is fully disengaged.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可