跳转到主内容
英语
中文

正翻译步骤 3

步骤 3
Remove the two 3.8mm PH1 screws with a Philips Head screw driver holding the right screen bracket in place. Again, wires may be blocking the accessibility to the screws, therefore you may need to move the wires around till you can access the screws. While removing the last screw, hold the screen steady with one hand to avoid binding the last screw or letting the screen fall.
  • Remove the two 3.8mm PH1 screws with a Philips Head screw driver holding the right screen bracket in place.

  • Again, wires may be blocking the accessibility to the screws, therefore you may need to move the wires around till you can access the screws.

  • While removing the last screw, hold the screen steady with one hand to avoid binding the last screw or letting the screen fall.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可