跳转到主内容
英语
中文

正翻译步骤 11

步骤 11
 Be Extremely Careful  in this next step as if you pry the hinge off too fast you may rip the connector between the logic board and screen. Carefully wedge a plastic opening tool between the hinge on the body as shown in the highlited area in picture two. (be sure to insert the wedge into the right hinge when looking down onto the phone as in the picture). Slowly pry the hinge off the body as shown in the third picture and set the phone down when you get to this step.
  • Be Extremely Careful in this next step as if you pry the hinge off too fast you may rip the connector between the logic board and screen.

  • Carefully wedge a plastic opening tool between the hinge on the body as shown in the highlited area in picture two. (be sure to insert the wedge into the right hinge when looking down onto the phone as in the picture).

  • Slowly pry the hinge off the body as shown in the third picture and set the phone down when you get to this step.

  • Next slide the connector cable out of the slot on the back side of the phone and the screen will be disconnected from the key pad body.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可