翻译步骤＃7 - iBook G4 14" 933 MHz-1.33 GHz Logic Board Replacement - iFixit

取消

英语

中文

上一步下一步

正翻译步骤 7

步骤 7

This is a diagram of the ribbon clamp connector you will disconnect in the next step.

This is a diagram of the ribbon clamp connector you will disconnect in the next step.
1) With your fingernails, grasp the locking bar on either side and pull up a small amount (about 1/16" or 2 mm).
2) After disengaging the locking bar, slide the cable out of the connector.

在开源创作共享许可协议下，你的投稿已被许可。